Vibrating Feeder
Vibrating feeder introduction
Vibrating feeder is also named vibratory feeder belong to a widely used feeding equipment for feeding crushed or grinded materials to crusher and grinding equipments. In the stone or rock production process, vibrating feeder granulars raw materials massively from storage bin to the subject equipments in uniform, timing and continuous condition. Vibrating feeder is widely used in metallurgy, mining, mineral processing, building materials, chemical, abrasive and other industries for feeding process.
Vibrating feeder features
1. Taking up small volume, light weight, simple and compact structure;
2. Easy installation, convenient repair and low operation cost;
3. High efficiency, large feeding capacity;
4. Low woking noise can improve the working environment;
5. Low power consumption, high power factors;
Vibrating feeder classification
According to the vibrating feeder's structure and usage, we can divide it into three types: GZD vibrating feeder, ZSW vibrating feeder, GZZ type vibrating feeder etc.
Vibrating feeder working principle
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose can be reached.
Vibrating feeder performance
Configuration design should minimize the material on the tank pressure, according to manufacturing requirements, silo effective outlet shall not be larger than the slot width of 1/4, material flow control in 6-18m / min. The feeding of larger material, silo bottom discharge should be set high enough to stop plate is not mine; effect of feeder performance, bar mine panel should be fixed on the groove. In order to make the silo is smoothly discharged, silo wall inclination after best design for the 55-65 degree.
Use of vibrating feeder space and time must be set to run a small current running, so as to avoid impact damage to the device core, under normal circumstances, do no-load operation. This series of electromagnetic vibrating feeder is not suitable for the occasion with explosion-proof requirements.
Vibrating Feeder List
- Vibrating feeder specification
- Vibratory feeder
- Vibrating feeder for coal